The ARB Intensity LED Light Bar’s creation introduces a specially designed heat sink and light bar mounting system. These features are pivotal to the seamless integration of the light bar onto the vehicle’s bull bar or roof rack. Further benefits of this system include improved light bar stability and driving vision than the commonly used systems on other style light bars.
Engineered in Australia and manufactured in the United States, using the same patented lens/reflector technology as in our existing ARB Intensity Driving Lights, the new ARB Intensity LED Light Bar features 40 individual LEDs (two rows of 20 individual LEDs) encased in a virtually indestructible polycarbonate lens.
Each beam configuration has a 9200 raw
Spot – Comprising of 40 x 10° Spot
Lens/Reflectors, this produces a very
strong single beam down the road with
a narrower improvement to peripheral
The introduction of the Intensity LED Light Bar provides an opportunity run a combination of round driving lights and a light bar. This benefits the driver by providing additional forward visibility and the option to significantly improve peripheral illumination by adjusting the round driving lights to point off-center or utilize a combination of flood and spot patterns. Light Bar Range: The new Intensity LED Light Bar is available in either ‘combo’ beam or ‘spot’ beam configuration giving customers the light pattern to suit their driving needs and preference. Each beam configuration has a 9200 raw lumen output. Combo – Comprising of 24 x 10° Spot Lens/Reflectors and 16 x 20° Flood Lens/Reflectors, this produces a light to assist the driver with both improved long distance and peripheral illumination. Spot – Comprising of 40 x 10° Spot Lens/Reflectors, this produces a very strong single beam down the road with a narrower improvement to peripheral illumination.
Bull Bar Mounting Kit:
The mounting kits come in 3 sizes, to suit the tube diameter of the vehicle’s bull bar. The mounting kits attach the light bar to the top tube of all ARB bull bars (47.6MM, 60.3MM AND 76.1mm diameter tube).
These mounting kits are constructed from extruded aluminium and the fasteners are stainless steel. The design and function is to provide a solid clamp between the light and the tube to minimize vibration and movement.
Positioning of Clamps on the Light Bar The T Bolt mounts into the top channel of light bar allowing for customized positioning of the clamps to best suit the user and their vehicle. Minimum distance between mounts is 210mm (8.4in) and maximum of 420mm (16.5in) – positioning must be even distance from the centre of the light. IMPORTANT NOTE: Ensure that all driving lights installed (position and function) comply with your local regulations.
The large aluminium extrusion body acts as a heat sink to draw heat generated from the electronics away from the LED array, thus increasing the efficiency and life of the LEDs.
Each light is secured via the mounting kits (bull bar and pedestal) to the vehicle with unique ARB tamper proof security fasteners.
On the Tube Mounting Kits, all fasteners are recessed within the body of the mounting clamp further increasing the security.
A unique moulded rubber seal sits between the polycarbonate lens and cast aluminium body. Together, the Gore® breather and sealed Deutsch electrical connectors create a watertight and dust proof seal to allow the light to achieve an IP68 rating for protection against dust ingress and submersion up to 3 meters.
ROUND LIGHT SOLD SEPARATELY
KIT PART INFORMATION
The new ARB Intensity LED Light Bar, the required mounting systems, and wiring loom have been kitted together to create an easy to order, all-in-one system for enthusiasts looking to outfit their vehicles with this new offering. There is a kit option for each beam pattern and mounting system choice (pedestal and various tube diameter).